Finesse
NEW SIZE!
FINESSE SIZES (D X H X L) - All units shown are packaged individually.
79 x 590 Stone NEW! 90 x 79 x 590 mm (3 1/2 x 3 1/8 x 23 1/4") Courses out with Premier Plus and Artiste 2
Metric Norman 90 x 57 x 290 mm (3 1/2 x 2 1/4 x 11 1/2”) Courses out with Metric Brick and Block
Premier Plus 90 x 79 x 257 mm (3 1/2 x 3 1/8 x 10 1/8”) Courses out with Artiste 2
90 x 290 Stone 90 x 90 x 290 mm (3 1/2 x 3 1/2 x 11 3/8”) Courses out with Metric Brick and Block
90 x 390 Stone 90 x 90 x 390 mm (3 1/2 x 3 1/2 x 15 3/8”) Courses out with Metric Brick and Block
90 x 590 Stone 90 x 90 x 590 mm (3 1/2 x 3 1/2 x 23 1/4”) Courses out with Metric Brick and Block
190 x 390 Stone 90 x 190 x 390 mm (3 1/2 x 7 1/2 x 15 3/8”) Courses out with Metric Brick and Block
168 x 590 Stone 90 x 168 x 590 mm (3 1/2 x 6 5/8 x 23 1/4”) Courses out with Premier Plus and Artiste 2
FINESSE SILL
257 x 590 Stone 90 x 257 x 590 mm (3 1/2 x 10 1/8 x 23 1/4”) Courses out with Premier Plus and Artiste 2
290 x 590 Stone 90 x 290 x 590 mm (3 1/2 x 11 3/8 x 23 1/4”) Courses out with Metric Brick and Block
L Corner Stone 90 x 190 x 190 x 390 mm (3 1/2 x 7 1/2 x 7 1/2 x 15 3/8”)
590 Sill with Drip Edge 190 x 90 x 590 mm (7 1/2 x 3 1/2 x 23 1/4”)
190 x 590 Stone 90 x 190 x 590 mm (3 1/2 x 7 1/2 x 23 1/4”) Courses out with Metric Brick and Block
Notes: Concrete masonry veneer units that are 90mm (3.5”) or less in height and produced as a single size will require more frequent control (movement) joint spacing. Refer to the CMHA CMU-TEC-009 series on movement control. Concrete masonry veneer units with a length greater than 410mm (16.14”) may not be defined as unit masonry by the respective standard. When considering non-standard dimensional units, structural performance of the unit and of the masonry construction should be reviewed and verified. To ensure proper construction, please refer to your local Building Code(s), Standards and Industry Best Practices. Brampton Brick Limited is not design responsible.
PHYSICAL PROPERTIES
Typical Brampton Brick Range
Physical Property
CSA
ASTM
Metric Units
Imperial Units
Individual Average of 3 Specified Individual Average of 3
- - > 25 MPa
> 3000 psi > 3500 psi - < 12 lb/ft 3 < 10 lb/ft 3
Minimum Compressive Strength
42 - 59 MPa
6000 - 8500 psi
Maximum Water Absorption
< 8% -
3.5 - 5.5%
4.9 - 7.7 lb/ft 3
Individual Average of 3
> 2000 kg/m 3 -
- >125 lb/ft 3
Density
2100 - 2250 kg/m 3
130 - 145 lb/ft 3
Based on CSA 165.2 for Grade I, Solid Units, Density over 2000 kg/m3 and ASTM C1634 for Normal Weight
STONE
33
Powered by FlippingBook