Architectural Masonry Prod Guide Ed7 (English)

Profile Series

56

PROFILE SERIES SIZES (D X H X L) - All units shown are packaged individually.

L Corner Stone 90 x 190 x 190 x 390 mm (3 1/2 x 7 1/2 x 7 1/2 x 15 3/8") (SOLID unit, not cored)

10cm 90 x 590 90 x 90 x 590 mm (3 1/2 x 3 1/2 x 23 1/4")

10cm 190 x 590 90 x 190 x 590 mm (3 1/2 x 7 1/2 x 23 1/4")

10cm Ashlar 90 x 90 x 390 mm (3 1/2 x 3 1/2 x 15 3/8")

10cm Standard 90 x 190 x 390 mm (3 1/2 x 7 1/2 x 15 3/8")

OTHER SIZES AVAILABLE ( D X H X L)

90 x 90 x 290 mm (3 1/2 x 3 1/2 x 11 3/8”) 140 x 90 x 390 mm (5 1/2 x 3 1/2 x 15 3/8”) 140 x 190 x 390 mm (5 1/2 x 7 1/2 x 15 3/8”) 190 x 90 x 390 mm (7 1/2 x 3 1/2 x 15 3/8”) 190 x 190 x 390 mm (7 1/2 x 7 1/2 x 15 3/8”)

240 x 90 x 390 mm (9 1/2 x 3 1/2 x 15 3/8”) 240 x 190 x 390 mm (9 1/2 x 7 1/2 x 15 3/8”) 290 x 90 x 390 mm (11 3/8 x 3 1/2 x 15 3/8”) 290 x 190 x 390 mm (11 3/8 x 7 1/2 x 15 3/8”)

Notes: Concrete masonry veneer units that are 90mm (3.5”) or less in height and produced as a single size will require more frequent control (movement) joint spacing. Refer to the CMHA CMU-TEC-009 series on movement control. Concrete masonry veneer units with a length greater than 410mm (16.14”) may not be defined as unit masonry by the respective standard. When considering non-standard dimensional units, structural performance of the block unit and of the masonry construction should be reviewed and verified. To ensure proper construction, please refer to your local Building Code(s), Standards and Industry Best Practices. Brampton Brick Limited is not design responsible.

PHYSICAL PROPERTIES

Typical Brampton Brick Range

Physical Property

CSA

ASTM

Metric Units

Imperial Units

Individual Average of 3 Specified Individual Average of 3

- - > 15 MPa

> 1800 psi > 2000 psi - < 15 lb/ft3 < 13 lb/ft3

Minimum Compressive Strength

18 - 23 MPa

2600 - 3350 psi

Maximum Water Absorption

< 175 kg/m 3 -

125 - 160 kg/m 3

7.8 - 10.0 lb/ft³

Individual Average of 3

> 2000 kg/m³ -

- > 125 lb/ft³

Density

2050 - 2150 kg/m³

125 - 135 lb/ft³

Based on CSA 165.1 for Third Facet “A” and ASTM C90 for Normal Weight

BLOCK

51

Powered by